Rear Seat Infotainment 47
Miracast™ (If Equipped)
.
Make sure the Android smart
device WiFi is enabled.
.
From the RSI Wireless Display
menu, select Miracast.
.
From the Android smart device,
enter Miracast, Screen Mirroring
or Android Wireless Display
application.
.
The Android smart device
displays “Rear Seat” as
available, and the RSI screen
displays the smart device is
available.
.
If the RSI does not show up on
the Android smart device, a
manual WiFi scan may have to
be done from the smart device.
.
From the smart device, connect
to the RSI.
After the connection has completed,
the screen from the smart device
will be duplicated on the RSI
screen. Any audio associated with
the screen shown will be available
through the RSI headphones.
Once the connection process is
done for the first time, the smart
device should appear on the RSI as
available whenever this device is
near the vehicle and the WiFi is
turned on. From the smart device,
make the connection as before.
Accessing the Miracast function
varies from device to device.
Usually this function can be found in
the Settings menu, under Display or
Wireless & Networks.
Digital Living Network Alliance
(DLNA) (If Equipped)
.
Make sure the device’s WiFi is
turned on.
.
From the smart RSI Wireless
Display menu, select DLNA. The
RSI screen will display a name
such as “DIRECT-xx-CUE” on
the smart device as an available
WiFi network.
.
From the smart device, select
the “DIRECT-xx-Rear Seat”
network.
.
From the RSI screen, select
Credentials to display a
Passphrase. The displayed
Passphrase must be entered
into the smart device. Once
entered, the “DIRECT-xx-CUE”
network will display as
connected.
From the smart device’s DLNA
application, select Rear Seat 1 or 2
as the screen to display the desired
video, audio, or picture files on
the RSI.
Once the connection process is
done for the first time, the WiFi
connection will always be made
whenever the device is within WiFi
range or the smart device WiFi is
turned on.
From any Miracast or DLNA screen,
select Menu from the remote
control. The WiFi band can be
switched to access the options to
disconnect from the RSI WiFi, or to
remove all DLNA passwords that
have been saved.
Supported DLNA media types are:
.
Video: .mp4 and .mpg
.
Audio: .mp3 and .aac
.
Picture: .jpeg and .jpg
To Next Page
Loading...
