Problems on the Road
. . . 378
To remove the jack and wheel
blocks, do the following:
1. To remove the cover, turn the
wing nuts counterclockwise
one-quarter turn.
2. Remove the jack.
Turn the knob counterclock-
wise to release the jack.
3. Unscrew the wing nut to
remove the wheel blocks.
To remove the tools, do the
following:
1. Open the top door on the
passenger’s side top box
storage compartment.
See "Top Box Storage" in
Section 1 for more
information.
2. Remove the storage bag.
3. Remove the jack tools from
the storage bag.
-Wheel Wrench
- Jack Handle
- Jack Handle Extensions
$10araEscaladeEXT Page 378 Wednesday, October 14, 2009 9:54 AM
To Next Page
Loading...
