Cake Aik - Vehicle Powering On Procedure

3.3 Powering on
1. Attach the battery, see fig. 3.
2. Connect the battery, see fig. 4.
3. Push and hold the start button for 2 seconds. The key card symbol is
shown pulsating on the display, see fig. 5.
4. Place the key card on the key card symbol The vehicle is activated and
unlocked. see fig 5
5. Check that that the rear hub automatic interface blinks with a green
light.
6. To change ride mode, briefly push the start button and toggle between
Reach, Eciency, Power and Walk assist see fig 5
7. Pushing and holding the same button for 3 seconds when at a standstill,
powers o the vehicle.
8. Get ready for your first ride!