20
Change cadence
To adjust the cadence of the bike, press the “Cadence” section on the home
screen.
Remote disable
Your bike is equipped with a feature to disable it remotely. It will use the cellu-
lar connection to disable the possibility to unlock the bike even using the keys.
Use this function if you e.g. suspect your bike has been stolen together with
the keys.
To access this function enter Bike settings and press “Remote disable”, use the
same method to enable it again.
NOTE: The function uses cellular connectivity to access the bike. This featu-
re will work even with the main battery removed as it relies on the tracking
module’s backup battery. Keep in mind that this backup battery is limited and
to ensure continued operation of the tracking functionality please connect
the main battery once a week and keep it connected for at least an hour (for
example during a ride).
Metric change on display
It is possible to change between Metric and Imperial measuring units in the
display. Use the app to change this setting under “Bike settings” available by
pressing the bike on the main page.
4. Riding
WARNING! Risk of personal injury.
• There is no foot brake, remember that you control both the front and rear
brakes from the handlebar. Left brake lever will engage the front wheel
and the right brake lever will engage the rear wheel.
• Risk of burns, stay clear of vehicle parts that are hot after usage.
• When activating walk assist be careful since you might accidentally push
the throttle down.
• Do not use the battery handle to lift the bike, it is only designed to be used
when carrying the battery.
To Next Page
Loading...
