8.7 Handlebar
Adjusting the handlebar angle
See the instruction video on
ridecake.com/en/makka-manuals-and-videos/
.
Tool: Allen key 5mm.
1. Loosen the 4 stem bolts.
2. Adjust the handlebar angle and center the handlebar. Make use of the
handlebar guidelines.
3. Tighten the 4 stem bolts to 10Nm.
4. Ensure to tighten the upper and lower bolts equally. Check that the gap (A)
between the upper and lower stem is equal. See Fig 23.
Fig. 23
Gap between the upper and lower stem
43
A
To Next Page
Loading...
