18
1.2 Unboxing
1x Preassembled CAKE Ösa
1x Charger
2x Clamp lever kit
2x Reflectors
2x Side-view mirror
1x Toolset
1x Pre load adjustment tool
2x Key for steering lock and battery lock
2x Gray key card for activating the vehicle
1x White master key card: required to reprogram a new gray key card if one
is lost. To program your gray key card, follow the reprogram instruction at
6.11 of the Owner’s Manual.
IMPORTANT: The White Master Key Card is required to program any new
Grey Key Cards should you need replacements. Additionally, the Master Key
Card will attempt to reprogram your screen if it’s nearby. Therefore, it is
essential that you quickly store the White Master Key Card in a safe place.
To disassemble the box and unpack the bike, please follow the following steps:
1. Unbox according to How to unbox the Ösa on ridecake.com/en/osa-
manuals-and-videos.
2. Check that the handlebar, wheels and saddle are properly fastened with
included toolset.
3. Charge the battery, see ”2.4 Charging”. During transport, the battery is
discharged.
4. Mount the side-view mirrors.
a) Place the washer between the handlebar and the nut.
b) Tighten the nut with the toolset wrench.
5. Mount the license plate in accordance with applicable law.
6. Mandatory in the US, voluntary in the rest of the world: Stick the
reflectorsto the side of the rear fender.
7. Recycle packaging in accordance with local laws and regulations.
To Next Page
Loading...
