7
2. General information
2.1 Charging
When charging the bike, do the following steps. ALWAYS read the
charging manual before charging. Please check the charger specific
manual at www.ridecake.com/manuals to if you have any questions
regarding your charger.
1. Make sure that the battery is connected to the bike.
2. Make sure that your charger’s voltage settings correspond to the voltage
in your outlet. If the charger has the wrong settings, it will break.
If you’re unsure on what voltage you use in your country, try a Google
search or call your electric utility provider.
3. ALWAYS start by connecting the charger to the bike, before you connect
the charger to the outlet!
4. Plug the charger into the outlet.
To Next Page
Loading...
