22
2.6 Clamp
The patent pending clamp is the key to the endless customizing alternatives,
to serve a variety of needs, bringing stu, for work or leisure.
1. Open the clamp.
2. Attach the clamp on the beam.
3. Tighten the screw to secure.
4. Lock the clamp by pulling down the handle.
5. Tightening torque for accessory clamp is 10-12 Nm
2.7 Lock
The battery is secured by a lock located in the lower front part of the battery.
You access the lock via the side plate, which the battery stands on, from the
front. You UNLOCK it by using the key that you received when you unpacked
the Ösa.
To Next Page
Loading...
