21
2.4 Charging
When charging the bike, do the following steps. ALWAYS read the charging
manual before charging. Please check the charger specific manual at
ridecake.com/manuals to if you have any questions regarding your charger.
1. Unplug the cable from the battery connector.
2. Put the charger to the same connector as battery connector.
3. Plug the charger to your closest standard outlet.
4. When the charger shows green lights, the bike is fully charged.
Note
: Charging your bike for the first time will take longer than normal,
approximately four hours. Important that you charge the battery to 100%
and the charger shows green light, before your first trip. It goes perfectly
well to charge your battery separately to the bike.
multi-chemistry | programmable
1. bik . wall
battery charger
e
2
WARNING! When charging, always first connect the charger to
the battery. Thereafter, connect the charger to the mains supply.
2.5 Ride modes
Your ride modes are shown as R1 on the display, to change ride mode,
give the ON/OFF button a quick tap.
To Next Page
Loading...
