26 — Q
UALIFIER PLUS
®
III
FX
Additional Memory Storage Keys (M10-M19)
In addition to M0-M5 (as described previously), your calculator has
ten additional independent Storage Registers — M10 through M19
— that can also be used to permanently store single, non-cumulative
values. To access these Storage Registers, use the following key-
strokes: s ® • (#), with (#) being digits 0 - 9. These Storage
Registers operate identically to M0-M5.
Examples:
Store 250 into M10 and recall the value:
STEPS KEYSTROKES DISPLAY
Store value in M10 2 5 0 s ® • 0 M-10 250.00
Turn off, and then turn on O o 0.00
Recall value stored in M10 ® • 0 M-10 250.00
Store 350 into M11 and recall the value:
STEPS KEYSTROKES DISPLAY
Store value in M11 3 5 0 s ® • 1 M-11 350.00
Turn off, and then turn on O o 0.00
Recall value stored in M11 ® • 1 M-11 350.00
Note: Repeat the above procedure for registers M12-M19, using digits 2 - 9.
Note: To clear all above values stored in Memory, press s x.
To Next Page
Loading...
Need help?
General
