Calculated Industries Construction Master 5 4050 - Entering Linear Dimensions

Pocket RefeRence Guide
— 10
PREFERENCE SETTINGS
Press Q, then %, then keep pressing %
to toggle through the main settings. Press
the + key to advance within sub-setting.
Use the - key to back up. Press o key
to exit Preferences.
PRESS Q AND: SETTING/FUNCTION
First press of % :
(Fractional
Resolution)
1/16
+ 1/32
+ 1/64
+ 1/2
+ 1/4
+ 1/8
+ 1/16 (repeats options)
Second press of
% :
(Area Displays)
Std.
+ 0. SQ FEET
+ 0. SQ YD
+ 0. SQ M
+
Std. (repeats options)
Third press of
% :
( Volume Displays ) Std.
+ 0. CU YD
+ 0. CU FEET
+ 0. CU M
+ (repeats options) Std.
Fourth press of % :
( Meter Linear
Displays ) 0.000 M
+ (oatingpoint) FLOAt M
+ (repeats options)
0.000 M
Fifth press of
% :
( Decimal Degree
Displays ) 0.00º
+ (oatingpoint) FLOAt
+ (repeats options)
0.00º
Sixth press of % :
( Fractional Mode ) Std.
+ COnSt
+ (repeats options) Std.
ENTERING DIMENSIONS
Entering Linear Dimensions
Examples of entering Linear Dimensions:
DIMENSION KEYSTROKE
Clear calculator o
17.5 m 17.5m
Clear calculator o
100 cm 100c
Clear calculator o
500 mm 500M
PRG4050E-A.indd 10
5/24/2013 2:14:07 PM