Calculated Industries Construction Master 5 4050 - Conversions and Memory Usage; Linear Conversions; Weight Conversions

Pocket RefeRence Guide
— 14
DIvIDING DIMENSIONS
Divide 4700 mm into thirds (divide by 3):
KEYSTROKE DISPLAY
4700M*3= 1566.667 MM
RECTANGuLAR AREA AND vOLuME
Find the area and volume:
• Length: 6200 mm
• Width: 3500 mm
• Height: 450 mm
First, multiply the Length times the Width to
ndtheArea.Then,multiplytheAreatimes
theHeighttondtheVolume:
KEYSTROKE DISPLAY
6200Mx 6200. MM
3500Mx 21.7 SQ M
450M= 9.765 CU M
ENTERING SquARE AND CuBIC AND
ADDING A WASTE ALLOWANCE
Add a 10% waste allowance to 5200 sq mm.
Then add a 20% waste allowance to
4500 cu mm:
KEYSTROKE DISPLAY
5200MM+10% 5720. SQ MM
4500MMM+20% 5400. CU MM
LINEAR CONvERSIONS
Convert 3200 mm to other dimensions:
KEYSTROKE DISPLAY
3200M 3200 MM
Qc 320. CM
Qm 3.200 M
Qf * 10 FEET 6 INCH
Qi * 126 INCH
Qy 3.499563 YD
*Repeated presses of f or i will toggle
between Feet-Inch-Fractions and Decimal Feet
or Inches.
WEIGHT CONvERSIONS
Convert 70 kilograms to other weights
(Pounds, Tons, Metric Tons):
KEYSTROKE DISPLAY
oo 0.
70wwww * 70 kG
Qw 0.077162 Ton
w 154.3236 LB
wµ 0.07 MET Ton
*Calculatormaynotdisplaykilogramsuponrst
press of
w ; it depends on which unit was
accessed last. So press
w until desired unit is
displayed, then convert.
PRG4050E-A.indd 14
5/24/2013 2:14:07 PM