Calculated Industries Dimension Master Plus - Key Functions: Convert; Conversion and Secondary Operations

 ³'
,0(16,21
0
$67(5
3
/86

[Convert]
Conversion Key — Converts between units of
measure and accesses secondary functions. Re-
peated presses scroll through available units of
measure:
Linear: Feet-Inch-Fraction, Decimal Feet, Inch-
Fraction, Decimal Inch, Yards and Meters
Square: Square Feet, Square Yards and Square
Meters
Cubic: Cubic Feet, Cubic Yards and Cubic Meters
Additional Functions Using [Convert]
[Convert
] used with . . .
[÷]
{Square Root}
Calculates the square root of
a displayed value.
[x]
{AC}
Clears and resets all registers to default
values.
[+]
{
π
}
Displays Pi (π = 3.141593).
[−]
{+/–}
Toggles displayed value’s sign (+/–).
[=]
{Mode}
Changes and displays Measuring
Beam Mode setting.
[•] {°F/°C} Displays the ambient temperature. If
the unit is set to English/Imperial (F/I), the
temperature is displayed as °F. If the unit is
set to Metric (Met), the temperature is dis-
played as °C.