Need help?Do you have a question about the Calculated Industries Dimension Master Plus and is the answer not in the manual?
General| Brand | Calculated Industries |
|---|---|
| Model | Dimension Master Plus |
| Category | Measuring Instruments |
| Language | English |
Explains the ultrasonic technology and Aim Assist pointer.
Details battery, operational distance, and measurement precision.
Lists display resolution, beam angle, operating conditions, size, and weight.
Explains unit selection and the Aim Assist pointer lamp.
Covers display accuracy, automatic shutoff, and error indicators.
Explains the ON/Clear Entry and OFF key operations.
Details the Math Operator and Digit Keys for calculations.
Explains Square, Fraction Bar, Length, Width, Height, and Area (LxW) keys.
Details Volume (LxWxH), Yards, Feet, Inch, Meter, and Recall keys.
Explains unit conversion and access to functions like square root and Pi.
Introduces three new modes: Smart, Narrow, and Wide.
Details Skip mode and improvements in microprocessor, accuracy, and storage.
Explains the purpose and usage of each beam mode for accurate measurements.
Describes how to use the Skip mode to ignore objects in cluttered environments.
Details greater math and fractional accuracy settings and methods.
Provides methods to select and set fraction denominator settings.
Explains conversion between fractional feet-inch and decimal formats.
Discusses expanded storage and unit conversions for measurements.
Details how area and volume results are displayed and recalculated.
Explains advanced memory operations for storing and manipulating values.
Guidelines for holding the unit and ensuring proper sensor function.
Step-by-step instructions for performing a basic linear measurement.
How to use the Aim Assist pointer and take measurements, interpreting results and errors.
Instructions for measuring length and width to calculate area.
Steps to measure length, width, and height for volume calculation.
Method for measuring rooms beyond the device's standard range using memory.
Guidelines for accurately inputting feet, inches, and fractions.
Provides examples of entering various dimensions and their display.
Examples of entering and displaying square measurements.
Method for dividing a length into equal spaces using manual entry.
How to convert feet-inch-fraction values into decimal feet.
How to convert square feet to other square units like yards and meters.
Example for calculating wall area for papering needs.
Continues example for calculating total wall length and area.
Example for calculating cubic yards of concrete for a patio.
Detailed instructions on using memory to add, subtract, display, and clear values.
Lists common symptoms and their solutions for device issues.
Explains automatic temperature compensation and its impact on accuracy.
Discusses factors affecting measurements and guidelines for outdoor use.
Warning against using the device in wet conditions to prevent damage.
Details the one-year warranty, exclusions, and how to obtain service in the U.S.
Information on repairs outside warranty, due to damage, or outside the U.S.
States warranty limitations, liability, and FCC compliance certification.
Invitation to provide suggestions for product improvements.
To Next Page
