To Next PageTo Next Page
Need help?Do you have a question about the Calculated Industries DigiRoller and is the answer not in the manual?
General| Brand | Calculated Industries |
|---|---|
| Model | DigiRoller |
| Category | Measuring Instruments |
| Language | English |
Instructions for turning the device on and off, and details on auto shut-off functionality.
Major parts like LCD, handle, shaft, and wheel.
Details on wheel hub, cam locks and shaft adjustment.
Turns the unit on or off.
Enters and stores rolled length value.
Enters and stores rolled width value.
Keys for area calculation and unit conversion.
Keys for storing, recalling, and manipulating measurements.
Keys for memory subtract, special functions, and wheel radius.
Keys for resetting, starting/stopping, and manual counting.
Features for storing multiple areas and calculating volume.
Enables automatic counting of a set distance.
Instructions for clearing the display and changing contrast.
Steps to test all display elements.
Explains the meaning of various symbols on the display.
How to convert and select measurement units.
How to enable or disable the audible bell for count functions.
Basic steps to take a measurement by rolling the device.
How to use memory keys for storage.
How to retrieve stored data.
How to permanently delete stored values.
How to use the manual count function.
How to measure distances accurately from wall to wall using the [+D] key.
Steps to calculate and display rolled area using L and W inputs.
Using memory keys to add/subtract measurements for complex shapes.
How to use the built-in back-light for better display visibility.
Calculating volumes using rolled height.
How to set a fixed height for volume calculations.
Using the [Area#] key to store and recall up to 9 measurements.
How to review all stored values for each Area Number.
How to copy or overwrite values in registers.
How to remove specific measurements or entire registers.
Procedure to clear all stored Area# measurements.
Calculating total wall surface area of a room.
Counting occurrences of a specific rolled distance.
Procedure to clear all registers and stored values.
Instructions for replacing the device's batteries.
Procedure to attach or change the measuring wheel.
How to recalibrate the device after changing wheels or batteries.
Information on default settings and how to reset the unit.
List and explanation of common error messages and their solutions.
Guidelines for maintaining and protecting the device.
Answers to frequently asked questions about the device's operation.
Technical details of the DigiRoller including power, range, and accuracy.
Details of the product's warranty coverage and limitations.
Information about contacting the manufacturer for suggestions.
Records of changes made to the manual.
