Calculated Industries DigiRoller User Manual

Taking Area Measurements
Your DigiRoller/DigiRoller Plus automatically calculates areas
once you’ve rolled a length and width. Remember, press
[RESET] to begin each new measurement.
1) Roll the first distance. Press the length key [L] and your
rolled distance will be automatically stored as the length.
2) Press [RESET]. Roll the second distance and press the
width key [W].
3) Press [RESET]. Press the [L x W] key to calculate the area.
18 – DigiRoller/DigiRoller Plus
™

Calculated Industries DigiRoller Specifications

General

Brand	Calculated Industries
Model	DigiRoller
Category	Measuring Instruments
Language	English