Storing Multiple Measurements
Your DigiRoller Plus has a unique [Area#] key used for storing
and recalling multiple measurements. You can store length,
width, height, area, and volume for each of the 9 [Area #] reg-
isters. You can recall these measurements later, even if you
turn off the DigiRoller (for example, to review your measure-
ments back at the office). When you recall your measure-
ments, you can also view totals for each (L, W, H, LxW,
LxWxH, Wall Area).
25 – User’s Guide
Area # L W H LxW LxWxH Wall Area
To Next Page
Loading...
