Using Auto-Count/Fixed Distance Mode
The DigiRoller Plus has an Auto-Count mode that allows you
to count how many times you’ve rolled a certain distance
(that you’ve set). If the bell is on, you will hear a short beep
each time you roll that distance and the counter in the upper
left of the display will increase by one.
For example, you want to count the number of times that you
roll 6 feet 8 inches.
Step: Key:
Enter AutoCount Mode [Set] [AutoCount]
(Feet-Inch starts flashing)
The Feet-Inch annunciator will start flashing. Press [M+] if
you want to change the units of measurement. The display will
scroll through the various units of measurement. Press [Set] to
select the measurement unit and begin storing. The first zero
(0) will start flashing.
Enter six feet [M+]
(press 6 times)
Store feet measurement [Set]
(-00 starts flashing)
34 – DigiRoller/DigiRoller Plus
™
To Next Page
Loading...
Need help?
General
