DigiRoller Plus model (only)
The DigiRoller Plus model has an additional row of keys.
Multiple Area Storage Key — For each of the 9 area
number registers, you can store length, width, height,
area, volume, and wall area.
Height — Stores a fixed height distance or a rolled
height for calculating cubic volumes and wall areas.
Volume — Calculates volume measurements from
entered or stored length, width, and height values.
AutoCount Mode — Places the unit in “Auto-Count”
Mode, allowing you to program a fixed distance to be
automatically counted. The DigiRoller Plus will auto-
7 – User’s Guide
To Next Page
Loading...
