EasyManuals Logo

Calculated Industries Dimension Master Plus User Manual

Calculated Industries Dimension Master Plus
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
8VHU·V *XLGH ³
Specifications
Power Source
6 Volts - 4 AAA Alkaline
(MN2400) 1.5 volt batteries
Range
18 inches – 60 feet
(0.5m – 18m)
Accuracy
99.5% or better over entire
range
Displayed
Measurement
Resolution
1/4 inch up to 10 feet; 1 inch
beyond 10 feet (6mm up to
3m; 25mm beyond 3m)
Beam Angle
Operating
Temperature
32°F – 100°F
(0°C – 38°C)
Size
5.6 x 3.25 x 0.9 inches
(143 x 84 x 23mm)
Weight
6 ounces (170 grams)
Battery Information
When you first receive your Dimension Master
Plus, you will need to remove the plastic tab stick-
ing out of the battery compartment before you use
it. 4 AAA Alkaline batteries are used to power the
Dimension Master Plus. If a “lo batt” reading ap-
pears on the display, the batteries need to be re-
placed by removing the door on the back of the
unit. The unit will continue to operate for approxi-
mately 2 hours after the low battery indication. For
best results, use DURACELL
®
AAA (MN2400)
batteries.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Calculated Industries Dimension Master Plus and is the answer not in the manual?

Calculated Industries Dimension Master Plus Specifications

General IconGeneral
BrandCalculated Industries
ModelDimension Master Plus
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals