Using the Memory Function
The Memory function allows you to add
rolled or counted values. However, you
cannot add dimensioned (rolled) and non-
dimensioned (counted) values together.
To add rolled values:
1) Roll the first value.* Press
[M+]. The
Memory indicator “M” appears and the
value is added to Memory.
2) Roll the next value. Press
[M+]. This
value is added to your previous value
stored in Memory.
3) You can continue to add values using
the
[M+] key. Press [RCL] [M+] to
review the total in Memory.
*Note: For count values, you must press the
[COUNT] key to count your value. Then press
[RCL] [COUNT] to move the count value to the main
display. Press [M+] to add this value to Memory.
See the "Function Keys" section for
additional memory functions.
User’s Guide – 18
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
