Calculated Industries Scale Master Pro XE - Additional Constant Functions

2) To change the units of measurement,
press [UNITS] until your desired units
appear. Press the [W/LxW] (X) or the
[L] (W) key to begin setting the distance.
The selected digit will start flashing.
3) Press
[M+] (S) to increase or [RCL] (T)
to decrease the selected digit. Press the
[W/LxW] (X) key to move to the next
digit to the right or the [L] (W) key to
move back to the left.
4) Once the desired value has been entered,
press the
[SET] key to save and exit.
Additional Constant Functions
[RCL] [+K]
Allows you to verify the current
constant value.
[SUB] + [+K]
Subtracts the constant value from the
displayed measurement value.
[ON/CLEAR] + [+K]
Resets the constant value to zero.
User’s Guide – 26
w ww . . co m
information@itm.com1.800.561.8187