Finding Area
1) Roll the first side and press the [L] key
to store as Length.
2) Roll the second side and press
[W/LxW]
to store as Width. The main display will
show the calculated Area.
Finding Volume
To access Volume after you have your
values set for Length, Width, and Height,
press [SET] [W/LxW]. Continued presses of
the [W/LxW] key will display the following
results:
1) Volume*
2) Wall Area**
3) Height**
4) Stored Length
5) Stored Width
6) Area
7) Perimeter
* If Height is not entered, a 0 will be displayed
and continued presses of [W/LxW] will not
redisplay the zero volume.
** Wall Area and Height do not display if a
Height has not been set.
User’s Guide – 28
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
