S320 OCS Getting Started Guide
7 of 42
Including shipping containers and contents, the S320 OCS weighs approximately
61 lbs. This weight exceeds the OSHA-recommended, safe-lifting weight for one
person. Accordingly, CALIENT recommends at least two persons take part any time
the switch is lifted or moved. In addition, always make sure the switch is right-side up
and level when lifting or handling it.
3. Remove and set aside the accessories box containing the cables, mounting screws and
ESD grounding strap.
4. Carefully lift the chassis out of the inner container.
5. Remove its anti-ESD bag from the chassis and keep it for future shipping needs.
6. Compare the contents of the shipment against the packing list. If any items are missing,
please contact CALIENT immediately at http://support.calient.net.
2.3 Contents Inventory
The shipping container should include the following contents:
System Hardware: The CALIENT S320 OCS chassis.
Cables: USB-to-DB9 serial cable (1), RJ45-to-DB9 cable and adapter (1), Ethernet
cables (2).
Documentation and Software: A single-sheet, two-page (front and back) S320/160
Optical Circuit Switch Quick Start Guide is included with each switch.
Comprehensive user documentation for the switch—including Hardware User Guide,
Getting Started Guide, TL1 Reference Guide, Troubleshooting and Alarm Reference Guide
and Release Notes—is available online at http://support.calient.net.
Every S320 OCS ordered from CALIENT is loaded with the most current release of
product software available at the time the switch is shipped.
Miscellaneous: Type 12-24 rack-mounting screws (12).
To Next Page
Loading...
Need help?
General
