To Next PageTo Next Page
Need help?Do you have a question about the Calpeda MXV-B and is the answer not in the manual?
General| Maximum Working Pressure | 10 bar |
|---|---|
| Insulation Class | F |
| Materials | Cast iron, stainless steel |
| Applications | industrial applications. |
| Voltage | 230V/400V |
| Housing Material | Cast iron |
| Impeller Material | Stainless steel |
| Seal Material | NBR |
Specifies conditions for clean, non-explosive, non-flammable liquids.
Guidance for safely moving the pump-motor unit to prevent tipping.
Instructions for vertical pump placement with adequate ventilation and access.
Requirements for suction and delivery pipe diameters and flow velocities.
Details for suction pipe installation, including foot valve and strainer.
Guidelines for delivery pipe installation, including gate valve and pressure gauge.
Essential safety and connection procedures for electrical components.
Key steps for safely starting the pump, including checks and filling.
Ensuring the shaft rotates freely by hand before initial start.
Procedure for completely filling the pump with liquid before operation.
Steps for initiating pump operation and verifying performance.
Routine checks and monitoring for sustained optimal pump performance.
Procedure for safely disassembling the pump unit for maintenance.
Detailed instructions for replacing the pump's mechanical seal.
Steps for correctly reassembling the pump components after dismantling.
Specific torque values for key components like impeller nuts and tie-bolts.
Information and procedure for ordering necessary replacement parts.
Visual guide with a detailed cross-section and list of all pump components.
