To Next PageTo Next Page
Need help?Do you have a question about the Calpeda MXV-B 40-806 and is the answer not in the manual?
General| Model | MXV-B 40-806 |
|---|---|
| Category | Water Pump |
| Max Head | 80 m |
| Voltage | 230/400 V |
| Frequency | 50 Hz |
| Maximum Working Pressure | 16 bar |
| Stages | 6 |
| Material | Stainless Steel |
| Pump Type | Vertical Multistage |
| Phase | Three Phase |
| Liquid Temperature | 110°C |
| Inlet Size | 1.5 inch |
Details standard operating conditions for clean liquids and environmental limits.
Instructions for safely moving the pump-motor unit to prevent imbalance and tipping.
Guidelines for vertical installation, pump placement, and ventilation space.
Specifications for suction and delivery pipe diameters and connections.
Requirements for airtight suction pipes, foot valves, and strainers.
Guidance on installing gate valves, pressure gauges, and check valves.
Safety and connection procedures for electrical power supply.
Steps for starting the pump, including preliminary checks and filling.
Ensuring the shaft rotates freely by hand before starting.
Procedure for filling the pump with liquid, avoiding dry running.
Steps for initial pump start-up, checking rotation and performance.
Routine checks and maintenance for pump and connected parts.
General instructions for safely dismantling the pump unit.
Procedure for replacing the mechanical seal, ensuring proper installation.
Steps for reassembling the pump unit after dismantling.
Specified torque values for impeller nuts and tie-bolts.
Information on ordering spare parts with correct designation and data.
Detailed diagram and list of pump components.
Details the delivery casing and various stage casings with their configurations.
Details the impeller, its nut, and related components for different pump models.
