IMPORTANT SAFETY INSTRUCTIONS
USER MANUAL
VORTEX 6, 4, 2.6 and 200V
P.2
USER MANUAL
VORTEX 6, 4, 2.6 and 200V
P.3
IMPORTANT SAFETY INSTRUCTIONS
1) Read the information for use (user manual).
2) Please keep this user manual in a safe place during the lifetime of the ampli-
er. The user manual forms an integral part of the amplier. Reselling of the
amplier is only possible if the user manual is available. Any changes made to
the amplier have to be documentated in writing and passed on to the buyer
in the event of resale.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this amplier near water (for example, in damp rooms or near a
swimming pool).
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the user
manual.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus that produce heat.
9) Protect the power cord from being walked on, pinched or damaged in any
other way. Pay particular attention to plugs and the point where they exit from
the amplier.
10) The amplier may only be used in accordance with the information provided
in the user manual. Before and during the usage of the amplier please ensure
that all recommendations, especially the safety recommendations as detailed in
the user manual, are adhered to.
The VORTEX–Amplier is designed for the amplication of pulsed audio
signals and the amplier should only be connected to speakers with an average
impedance that is not lower than the impedances specied in points 3.9.2, 3.9.3
and 3.9.4.
11) Do not place this amplier on an unstable cart, stand,
tripod, bracket, or table. The device may fall, causing
serious injury, and serious damage to the device itself.
12) The amplier can only be disconnected from the power supply by removing
the plug, which must be freely accessible at all times. Unplug this amplier
during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualied service personnel.
Servicing is required when
the power-supply cord or plug has been damaged,
liquid has been spilled or objects have fallen into the amplier,
the amplier has been exposed to rain or moisture,
the amplier has been dropped or suffered damage in any other way,
the amplier exhibits a distinct change from its normal function or
performance.