2.0 11/2011
© 11/2011 © CAME cancelli automatici s.p.a. - The data and information in this manual may be changed at any time and without obligation on the part of Came Cancelli Automatici S.p.a. to notify said changes.
ENGLISH
1) Keep pressed the "CH1" button on the control board (the LED light flashes).
Memorisation
Flashing LED
AF radio frequency card
PROG
2) The transmitter button sends the code, and the LED will stay on to signal that memorisation was successful.
N.B.: if you later wish to change code, repeat the sequence described.
LED on
AF radio frequency card
PROG