Need help?Do you have a question about the CAME A 3000 and is the answer not in the manual?
General| Max Gate Weight | 400 kg |
|---|---|
| Power Supply | 230 V AC |
| Motor Voltage | 230 V AC |
| Power | 150 W |
| Current | 1.2 A |
| Thrust | 3000 N |
| Duty Cycle | 30% |
| Operating Temperature | -20°C to +55°C |
| Protection Level | IP54 |
| Voltage | 230 V AC |
| Maximum Gate Weight | 400 kg |
| Protection Rating | IP54 |
| Max Gate Length | 3 m |
| Maximum Gate Width | 3 m |
Crucial safety advice and precautions to be read carefully.
Covers product purpose, introduction, and checks before installation.
Details installation steps, user recommendations, and general safety advice.
Explains symbols, defines intended use/restrictions, and lists reference standards.
Details the gearmotor, its technical features, and specifications.
Identifies main parts and provides overall dimensions for different models.
Essential checks to perform before starting the installation.
Lists necessary tools, cable specifications, and shows a standard installation diagram.
Examples of mounting configurations and key measurements for gate leaves.
Instructions for attaching anchoring plates and fixing the gearmotor unit.
Procedures for manual release and setting the stop microswitch.
Wiring diagrams for connecting motors to the ZA3N/ZM3E control panels.
Specific instructions and measurements for outward opening swing gates.
Common malfunctions, solutions, and guidelines for product disposal.
Manufacturer's statement of compliance with relevant EU directives.
Crucial safety warnings, intended use, limits, and reference standards for the control panel.
Overview of the control panel, its functions, technical data, and fuse information.
External dimensions and a detailed diagram identifying key control panel components.
Preliminary checks, required tools, and steps for mounting the control panel enclosure.
Wiring diagrams for connecting operators, main power, and 24V accessories.
Instructions for connecting warning lights, lamps, photocells, and safety edges.
Details on command device connections and trimmer settings for operational functions.
How to adjust motor torque and activate the radio command system.
Lists compatible transmitters and guides the installation of the radio frequency card.
Step-by-step process for memorizing transmitter codes on the control board.
Guidelines for dismantling, disposal, and manufacturer's compliance declaration.
To Next Page
