Page 9 - Manual FA01669-EN - 12/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
PANIC function
The PANIC function is a priority call to the porter. Use this function in urgent or emergency situations.
> 2s
Press and hold the button for more than 2 seconds to
send a panic signal to the porter’s desk.
The button LED fl ashes when the panic signal
is received at the porter’s desk.
Alarm contact
During installation, an alarm contact can be confi gured external to the video receiver.
When the alarm contact is activated, an emergency signal is sent directly to the porter’s desk.
The video receiver will beep intermittently to signal activation.
Auxiliary controls (AUX function)
Auxiliary controls are customised, accessory functions set up when the video intercom is installed.
Examples include switching on a light or opening a gate.
Press the desired AUX button to activate the associated
auxiliary control.
Accessory devices may need to be installed,
depending on the type of command to be activated.
To Next Page
Loading...
Need help?
General
