Need help?Do you have a question about the CAME BKV15AGE and is the answer not in the manual?
General| Model | BKV15AGE |
|---|---|
| Max Gate Weight | 1500 kg |
| Motor Voltage | 230 V AC |
| Operating Temperature | -20°C to +55°C |
| Type | Gate Opener |
| Safety Features | Obstacle detection |
Identifies the product type covered by the manual.
Crucial safety guidelines for installers.
Highlights potential hazards for users.
Guidelines for product end-of-life handling.
Explains symbols and lists product specifications.
Lists and illustrates the components of the operator unit.
Details the connections and components on the control board.
Provides dimensional data of the operator unit.
Outlines operational limits for different gate operator models.
Detailed technical parameters for each model.
Specifies fuse types for various components.
Recommended cable types and minimum cross-sections.
Steps before laying the foundation frame for installation.
Instructions for setting up the anchoring plate.
Details on how to attach the gate rack.
Guide to adjusting the gear coupling for smooth operation.
Securely fixing the operator to the anchoring plate.
Setting the gate's open and closed limits using mechanical switches.
Setting limits using magnetic sensors.
Guidelines for routing cables safely.
Connecting the system to the main power.
Details on power output for accessories.
How to connect flashing beacons and warning lights.
Connecting various control inputs like keypads and readers.
Connecting photocells and sensitive edges.
Explains the function of the programming buttons.
Initial steps for system setup and commissioning.
Settings for opening direction, motor test, calibration, and motor type.
Adjust opening/closing speeds, slowdowns, and obstruction detection.
Configure inputs (CX, CY, CZ, CK), total stop, and safety device tests.
Configure wireless devices, commands, hold-to-run, outputs, obstacle removal.
Configure commands, hold-to-run, and B1-B2 output.
Configure automatic closure, lights, courtesy time, and pre-flashing.
Configure RSE cards, CRP, and manage data save/load.
Register, remove, and manage users and their functions.
Configure language, password, maintenance, and view errors.
Configure clock display, date/time, DST, and manage timers.
Set display language and manage password protection.
Save and load user data and system configurations.
Lists and explains common error messages and their causes.
Concluding steps for completing the installation.
Connecting two operators for synchronized control.
Demonstrates operating modes for paired systems.
Mean Cycles Between Failures and installation considerations for windy areas.
Periodic checks for proper operation and wear.
To Next Page
