CAME BPT TA/450 - Temperature Management Algorithms; Differential Algorithm Configuration

C
B
ON ON
OFF
1 h
Page 12 - Manual FB00801-EN - ver. 1 - 07/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
This control system is recom-
mended in systems that are
particularly dicult to control with
extreme variations of the external
temperature.
Setting the type of temperature management algorithm
The device allows you to choose the type of algorithm to be applied for system manage-
ment from dierential and integral proportional.
Activating and configuring a dierential algorithm
Time
Setpoint
- dierential
setpoint
+ dierential
setpoint
Temperature
Repeat the procedure described to change the programming of all the temperature levels
(ECO, NIGHT, COMFORT).
N.B. Once programming is complete, the display flashes for 2 seconds to confirm that
the changes have been successful.
Press button P to confirm the
value of the temperature shown
on the display and move on to
programming the next tempera-
ture level (ECO).
The
buttons allow you to
vary the temperature set for the
COMFORT program.