04/2014
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
Terminals for powering the following accessories:
- 24V AC normally;
- 24V DC when the emergency batteries are
working;
Maximum allowed power: 35W
Power supply for accessories
230V (AC) Power, 50/60Hz
frequency
Cable lug with bolt and washer for connecting to earth.
Open-gate status light (contact range: 24V – 3W max)
- Signal that gate is open; turns o when gate is closed.
Movement fl ashing light (Contact range: 24V – 25W max) -
Flashes during the gate’s opening and closing phases.
Stop button (N.C. contact)
- Gate stop button. Excludes automatic closing. For motion to resume, press
the command button or the remote control button.
Key selector and/or command button (N.O. contact)
- Gate opening and closing command.
By pressing the button or turning the selector key, the gate inverts
its movement or stops depending on which the settings on the DIP
switches.
Key selector and/or partial opening button (N.O. contact)
- Partial gate opening for pedestrian access.
Command and control devices
Warning devices
To Next Page
Loading...
