04/2014
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
LIST WARNINGS OF THE COMMAND AND SAFETY DEVICES’ CONTROL LEDs:
- «PROG» Red Led. Normally o .
When the transmitter is activating, it turns on or fl ashes.
- «PWR» Green led. Normally on.
Shows that card is properly powered;
- «1» Yellow led. Normally o .
Shows activation of the PARTIAL STOP button.
- «3p» Yellow Led indicator. Normally o .
Indicates that the PARTIAL OPENING button has been activated.
- «7» Yellow Led indicator. Normally o .
Indicates that the OPENING and CLOSING button has been activated.
- «C1» Yellow led. Normally o .
Shows that there are obstacles between the photocells (which are in OPEN WHILE CLOSING mode).
- «C3» Yellow Led. Normally o .
Shows that there are obstacles between the photocells (which are in PARTIAL STOP mode).
- «C7» Yellow Led. Normally o .
Show obstacles detected by the sensitive edge (which are in OPEN WHILE CLOSING mode).
- «C8» Yellow Led. Normally o .
Shows obstacles detected by sensitive edge (which are in CLOSE WHILE OPENING mode).
9 Warning Led