CAME BX704ALS - Intended Use; Technical Data

170
130
300
22 max.
307,5
105
107
170
241,5
p. 4 - Manual FA01206-EN - 06/2018 - © CAME S.p.A. - Translated original instructions
DIMENSIONS
DESCRIPTION
BX704ALS Operator (tested in compliance with EUROPEAN STANDARDS on shock forces) featuring a control board, movement control and obstruction detecting
device plus mechanical limit-switches for sliding gates weighing up to 400 kg.
BX708ALS Operator featuring a control board, movement control and obstruction detecting device plus mechanical limit-switches for sliding gates weighing up to
800 kg.
INTENDED USE
The BX704ALS operator is designed to power sliding gates in single homes; whereas the BX708ALS is also suitable for apartment blocks.
 Do not install of use this device in any way, except as specified in this manual.
INTENDED USE
Model BX704ALS BX708ALS
Standard reference* length of the sliding part (m) 4
Maximum weight of the sliding part (kg) 400 800
Pinion module 4
* For other-than-standard measurements, see the following graphs.
TECHNICAL DATA
Datum BX704ALS BX708ALS
Protection rating (IP) 44
Power supply (V - 50/60 Hz) 230 AC
Input voltage to motor (V - 50/60 Hz)
Stand-by consumption (W) 2.6 2.4
Consumption with Green Power (W) 0.5
Power (W) 420 530
Thrust (N) 300 800
Opening speed (m/min) 10
Operating temperature (°C) -20 to +55
Condenser (μF) 12 20
Apparatus class I
Motor's heat protection (°C) 150
Weight (Kg) 15
KEY
This symbol shows which parts to read carefully.
⚠
This symbol shows which parts describe safety issues
☞
This symbol shows which parts to tell users about.
The measurements, unless otherwise stated, are in millimeters.