CAME Wi-Fi PLX V User Manual

Page 13 - Manual - FA01792-EN - 10/2022 © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
PROGRAMMING
For information on programming calls and associating internal receivers, please consult the user manual for the entry panel.
Programming OPEN GATE and GATE STATUS function (latch)
Enable the function when associating the internal receiver.
Use this function to control and display the gate status (open/closed). The operator status is indicated by the LED on the internal
receiver switching on or o .
Press and hold the
button. The LED switches on to confi rm the function was activated.
The DOOR STATUS function is active by default. It is automatically deactivated when the OPEN GATE and GATE STATUS
function is enabled.
Programming the AUTOMATIC DOOR RELEASE function
Enable the function when associating the internal receiver.
> 5s
Enabling the function allows the user to activate/deactivate it as required. The function is enabled by default.
This function is used to open the entrance automatically when there is a call from the entry panel. No communication is activated and
the call ends automatically.
Press and hold the
button for more than 5 seconds to enable or disable the function.
If the LED remains on, the function is enabled.
If the LED fl ashes, the function is disabled.

CAME Wi-Fi PLX V Specifications

General

Brand	CAME
Model	Wi-Fi PLX V
Category	Intercom System
Language	English