CAME ZN2 User Manual

SCHEDA ELETTRONICA - CONTROL BOARD - CARTE ELECTRONIQUE
STEUER PLATINE - TARJETA ELECTRONICA - ELEKTRONISCHE PRINTKAART
ZN2
RICAMBI ORIGINALI - ORIGINAL SPARE PARTS - PIECES DE RECHANGE ORIGINALES
ORIGINALERSATZTEILE - REPUESTOS ORIGINALES - ORIGINEEL ONDERDEEL
SCHEDA ELETTRONICA - CONTROL BOARD - CARTE ELECTRONIQUE
STEUER PLATINE - TARJETA ELECTRONICA - ELEKTRONISCHE PRINTKAART
ZN2
RICAMBI ORIGINALI - ORIGINAL SPARE PARTS - PIECES DE RECHANGE ORIGINALES
ORIGINALERSATZTEILE - REPUESTOS ORIGINALES - ORIGINEEL ONDERDEEL

CAME ZN2 Specifications

General

Brand	CAME
Model	ZN2
Category	Control Unit
Language	English

Summary

Electrical Connections

Power and Accessory Terminals

Connects power, accessories, status lights, and motor.

Limit Switch Connections

Connects limit switches for open and close functions.

Control and Safety Inputs

Connects buttons, selectors, and safety devices for gate operation.

Antenna Connection

Connects the radio receiver antenna.

Function Selector Settings

Automatic Closing and Gate Run Functions

Configures automatic closing timer and gate run modes.

Manual Operation and Flasher Settings

Controls manual gate operation and pre-opening/closing flasher.

Safety and Stop Functions

Manages safety device tests, total stop, and obstacle detection behavior.

Closing Phase and Partial Stop

Sets behavior for closing phase, inversion, and partial stop on obstacles.

Configuration and Operation

Parameter Settings

Adjusts gate waiting time, partial opening, and motor sensitivity.

Radio Command Activation

Steps for connecting antenna and inserting radio frequency card.

Radio Transmitter Memorisation

Procedure for memorizing radio transmitter codes.

Disposal Information