To Next PageTo Next Page
Need help?Do you have a question about the CAME ZBX74-78 and is the answer not in the manual?
General| Max. motor power | 800 W |
|---|---|
| Power supply | 230V AC ±10%, 50/60Hz |
| Operating temperature | -20 ÷ +55 °C |
| Operating Voltage | 230V AC ±10%, 50/60Hz |
| Power Consumption | 800W |
Details main power input, motor terminals, and accessory power outputs.
Covers connections for stop buttons, keyswitches, and safety devices like photocells.
Explains connections for gate indicator lights and radio receivers.
Details connections for FA-F (open) and FC-F (close) limit switches.
Steps for connecting antenna and installing radiofrequency card.
Process for memorising CH1 and CH2 buttons on the transmitter.
Step-by-step guide to program gate deceleration endpoints.
How to modify deceleration speed using CH1 and CH2 buttons.
Method to disable deceleration using DIP Switch 10.
Steps to activate and modify the re-closing partial stop function.
Sets the waiting time while the gate is open before automatic closing.
Sets the duration of the gate's partial opening.
DIP switches 1-4 control closing modes, open/stop, open-close, and open only functions.
DIP switches 5-8 manage flasher, obstacle detection, and specific safety behaviors.
DIP switches 9-10 control total stop and limit switch slowing activation.
DIP switches 1-2 select command modes like closing only, open-close, or opening.
DIP switches 3-4 configure the optical reader and disconnected states.
Information on recycling and proper disposal of the product and packaging.
