All the data and information contained herein is considered subject to change at any time and at our discretion.
Warning light (24V-3W max.)
Warning light (24V-3W max.)
Stop button (N.C.) Emergency button
already connected, in the event of additions
Stop button (N.C.) Emergency button
already connected, in the event of additions
Stop button (N.C.) Emergency button
already connected, in the event of additions
connected in series
already connected, in the event of additions
Open button (N.O.) Opening button already
connected, in the case of additions to make
Button for partial opening (N.O.)
Closing button (N.O.) Closing button alrea-
dy connected in the case of additions to
Closing button (N.O.) Closing button alrea-
dy connected in the case of additions to
Closing button (N.O.) Closing button alrea-
dy connected in the case of additions to
make in parallel
dy connected in the case of additions to
E4
10
11
TS
1
2
3
3P
4
5
6
7
2Mot
2
C1
CX
B1
B2
FC
F
A
F
Power supply: 230V (AC) single-phase (220-Com)
Power supply: 400V (AC) three-phase (380-COM) and 230V (AC) three-phase (220-COM)
Single-phase/three-phase motor 230/400V (AC) max.750 W
Cycle or courtesy lamp (230V) (Cycle lamp Dip 16 OFF Dip 17 ON)-(Courtesy light Dip 16 ON
Output 230V (AC.) in motion (e.g. fl ashing lamp - max. 25W)
Radio contact and/or control button
(see dip-switch 2-3 sel. functions)
Contact (N.C.) «Re-closing during
opening»*Dip 8 OFF and Dip 9 OFF)
Contact (N.C.) partial stop (Dip 8 OFF Dip 9 ON
Contact (N.C.) of «Re-opening during
Contact (N.C.) of «Re-opening during
closure
Contact (N.C.) of «Re-opening during
End stop connection closes
End stop connection opens
Contact outlet (N.O.) Contact capacity: 5A
Output for control of 2 coupled motors
ZT6C electrical connections
ZT6C electrical connections
ZT6C electrical connections