To Next PageTo Next Page
Need help?Do you have a question about the CAME ZL90 and is the answer not in the manual?
General| Model | ZL90 |
|---|---|
| Power supply | 230 V AC 50/60 Hz |
| Operating temperature | -20°C to +55°C |
| Protection class | IP54 |
| Protection Rating | IP54 |
| Functions | Automatic closing, pedestrian opening |
Details on main power supply and terminals for 24V accessories.
Connections for flashing lights and open gate indicator lights.
Connections for safety devices, buttons, and gearmotors.
Output connection for the radio receiver's second channel.
Procedure for memorizing remote control transmitters onto the control board.
Adjusts waiting time for automatic gate closing (1-150 sec).
Adjusts second motor's waiting time during closing (1-16 sec).
Adjusts motor power sensitivity for motion and slowing down.
Adjusts gate leaf running and slowing speeds.
Configures obstacle stand-by or partial stop function via DIP switches.
Activates automatic closing timer after gate reaches full open.
Configures various operating modes like open-stop-close-stop, open-close-inversion.
Enables obstacle detection, photocell safety test, and total stop functions.
Checks and corrects gearmotor movement direction before calibration.
Procedure for automatic calibration of gearmotors for gate run.
