Camec RV Media EVOLUTION - TV Controls and Installation; Wall Mounting Procedures

It is recommended that this TV be removed
NOTES:
Wall-Mounting
TV CONTROLSCONTROLS ON THE TV
INSTALLATION
1. After you insert a disc in the disc tray, press the button to play, and press twice to pause.
2. Press the button when the power is on to eject the disc. Press the button again to re-load the disc.
3. VOL(+) - This button increases the TV’s volume. If the On Screen Display (OSD) menu is active,
pressing this button will move the selection to the right.
4. VOL(-) - This button decreases the TV’s volume. If the OSD menu is active, pressing this button will
move the selection to the left.
5. CH(+) - This button changes the TV channel upward. If the OSD menu is active, this button functions
as up control for the menu.
6. CH(-) - This button changes the TV channel down. If the OSD menu is active, this button functions as
down control for the menu.
7. MENU
- This button activates the OSD menu. If a sub-menu is active, pressing this button will return
selection to the previous menu level.
8. INPUT
- This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
9. POWER
( ) - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
from the wall bracket when the RV is in transit.
www.caravansplus.com.au