To Next PageTo Next Page
Need help?Do you have a question about the CamFive CFL-CMA1610T and is the answer not in the manual?
Technical specifications for the single-phase series laser machine.
Technical specifications for the three-phase series laser machine.
Detailed technical specifications for the laser machine's water chiller unit.
Overview of the control panel interface and key functions for operating the machine.
Steps for installing the chiller and ensuring proper electrical connections.
Connecting the water hoses for the chiller system to the machine.
Connecting the air assist compressor to the machine's air pump inlet.
Installing the laser tube and connecting it to the power supply unit.
Procedure for turning on the laser machine and its components.
Initial steps for aligning the laser beam using the control panel and mirrors.
Detailed steps for calibrating the first and second mirrors of the laser system.
Final calibration steps for the third mirror and laser pen tip.
Instructions for removing the honeycomb bed and mounting the rotary attachment.
How to place and secure an object using the rotary attachment's chuck.
Setting up rotation parameters and calculating object diameter for engraving.
Guide to installing the SmartCarve software from the CD.
Procedure for loading the necessary drivers for machine communication.
Creating a shape, setting the origin, and configuring work parameters for testing.
Sending a job to the machine and observing the laser's operation.
Importing image files and adjusting grayscale levels for engraving.
Setting up parameters for image engraving, including invert option.
Performing weekly lubrication of rails and moving components.
Procedures for cleaning and replacing mirrors.
Procedures for cleaning and replacing the laser lens.
Replacing chiller water and cleaning the air assist compressor filter.
Interpreting the status of LED indicators on the control card.
Resolving issues related to software, USB connection, and COM ports.
Diagnosing and resolving problems with machine power, movement, and cutting.
Answers to common questions regarding machine operation, temperature, and air pump.
Information on how often to perform maintenance and cleaning tasks.
General