1. Connect a USB cable between your module and computer.
2. Connect the Cellular antenna.
3. Connect the Diversity antenna, if used. (Not required. See Antenna connections (p. 29).)
4. Open a web browser and go to: www.cell.linktodevice.eu/.
TIP:
If your computer does not respond to the DNS server correctly, browse to 192.168.86.1.
5. When a new CELL200 series OS is available you will see a red notification in the Version
field of the Status Tab.
6. Select the OS Update Tab. Clicking the Apply Update button will retrieve the CELL200
series OS from the Campbell Scientific website and begin the update process. If you already
downloaded the OSfrom the Campbell Scientific website to you computer you can click
the Send File button and follow the prompts.
CELL200-Series 4G LTE Cellular Module 81
To Next Page
Loading...