7. When a new CELL200 series OS is available, in the Settings Editor on the Cellular Tab you
will see a field called Cellular OSUpdate Pending. This field does not appear unless an
update is available. Select Apply Update to begin the process, or Ignore to update at
another time.
8. Apply to save your changes.
9. When new module firmware is available, in the Settings Editor on the Cellular Tab you will
see a field called Cellular Module OTA Update Pending. This field does not appear unless
an update is available. Select Start Update to begin the process, or Ignore to update at
another time.
10. Apply to save your changes.
CELL200-Series 4G LTE Cellular Module 83
To Next Page
Loading...