29
Appendix F. Sensors and Peripherals
Campbell Scientific sensors, power supplies, and peripherals expand the
measurement and control capability of the CR200(X). Consult product literature
at www.campbellsci.com or a Campbell Scientific applications engineer to
determine what peripherals are most suited to particular applications. Listings
below are not exhaustive and are current as of the manual publication date.
F.1 Sensors
Most electronic sensors will interface with the CR200(X). The following
sensors are available from Campbell Scientific and are easily integrated into
CR200(X) systems. Please contact Campbell Scientific for specific model
numbers.
Table 29. Sensors available from Campbell Scientific
Air Temperature Precipitation
Relative Humidity Road Weather
Barometric Pressure Soil Heat Flux
Conductivity Soil Temperature
Dissolved Oxygen Soil Volumetric Water Content
Distance Soil Water Potential
Duff Moisture Solar Radiation
Electrical Current Strain
Electric Field Surface Temperature
Fuel Moisture and Temperature Turbidity
Geographic Position Water Level
Heat, Vapor, and CO
2
Flux
Water Quality
Leaf Wetness Water Temperature
ORP / pH Wind Speed / Wind Direction
F.2 Dataloggers
Other Campbell Scientific datalogging devices can be used in networks with the
CR200(X). Data and control signals can pass from device to device with the
CR200(X) functioning as a leaf node in PakBus® networks.
To Next Page
Loading...
