Campbell CR200 - Figure 19: PC200 W Monitor Data Tab; Figure 20: PC200 W Monitor Data Tab

Section 2. Quickstart Tutorial
19
Figure 19: PC200W Monitor Data Tab
2.2.3.2.3 Procedure (PC200W Step 5)
1. In the Add Selection window, click on the OneMin table, and then
click Paste. The OneMin table is now displayed in the main display.
Figure 20: PC200W Monitor Data Tab
2.2.3.2.4 Procedure (PC200W Step 6)
1. Click on the Collect Data tab. From this window, data is chosen to be
collected as well as the location where the collected data will be stored.