Campbell CR200 - F.3 Power Supplies

Appendix F. Sensors and Peripherals
30
Table 30. Dataloggers available from Campbell Scientific
Model Description
CR200(X) Series Datalogger
CR800 Series Measurement and Control Datalogger
CR1000 Measurement and Control System
CR3000
Micrologger
®
F.3 Power Supplies
Several power accessories are available from Campbell Scientific to power the
CR200(X).
F.3.1 Batteries
Table 31. Batteries available from Campbell Scientific
Model / Part Number Description
16869 CR200(X) 12 Volt 0.8 Ahr Sealed Rechargeable Battery
with Connector
BPALK D-Cell 12 Volt Alkaline Battery Pack
BP12 12 Amp-Hour Sealed Rechargeable Battery (requires
regulator & primary source). Includes mounting bracket for
CSI enclosures.
BP24 24 Amp-Hour Sealed Rechargeable Battery (requires
regulator & primary source). Includes mounting bracket for
CSI enclosures.
F.3.2 Primary Sources
Table 32. Primary Power Sources available from Campbell Scientific
Model Description
9591 18 Vac 1.2 Amp Wall Plug Charger (accepts 110 Vac
mains power, requires regulator)
14014 18 Vdc Wall Plug Charger (accepts 90-264 Vac mains
power, requires regulator)
SP5 5-Watt Solar Panel (requires regulator)
SP10 10-Watt Solar Panel (requires regulator)
SP20 20-Watt Solar Panel (requires regulator)
SP5-L 5-Watt Solar Panel (requires regulator)
SP10R 10-Watt Solar Panel (includes regulator)
SP20R 20-Watt Solar Panel (includes regulator)
SP65 65-Watt Solar Panel (includes regulator)