Campbell CR200 - Signal Conditioners; Current Shunt Modules; Telecommunications Hardware; Network Links

Appendix F. Sensors and Peripherals
32
F.7 Signal Conditioners
Signal conditioners modify or complete the output of a device to be compatible
with the CR200(X).
F.7.1 Current Shunt Modules
Table 36. Current Shunt Modules available from Campbell Scientific
Model Description
7977 100 ohm Shunt Resistor Assembly
F.8 Telecommunications Hardware
Table 37. Telecommunications Hardware available from Campbell Scientific
Model Description
RF401 100 mW spread spectrum radio modem
CR206(X) 100 mW spread spectrum radio enabled datalogger
CR211(X) 100 mW spread spectrum radio enabled datalogger
CR216(X) 100 mW spread spectrum radio enabled datalogger
F.8.1 Network Links
Table 38. Antennas for Spread Spectrum Radios available from Campbell
Scientific
Model Description
14310 900MHz 0dBd Omni 1/4 Wave Whip Antenna
14204 900MHz 0dBd Omni 1/2 Wave Whip Antenna
14221 900MHz 3dBd Omni Antenna
15970 900MHz 1dBd Dipole Antenna
14205 900MHz 6dBd Yagi Antenna
14201 900MHz 9dBd Yagi Antenna
16005 2.4GHz 0dBd Omni 1/2 Wave Whip Antenna
16755 2.4GHz 13 dBd Yagi Enclosed Antenna
17480 900MHz or 2.4GHz 1dBd Dipole Antenna
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type
N Male Connector
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors