Main Screen
After successfully connecting in the app, the main camera control screen will be displayed.!
Status Bar!
The topmost line of the status bar shows the camera’s battery life, camera name, and number
of shots available on the camera’s removable media using the current settings. Note that not
all cameras will provide the number of shots remaining.!
The bottom line shows the CamRanger 2 battery life, the CamRanger 2 SD card status, and if
present, the available space on the SD card.!
The gear button the right will open the app settings. The settings are covered in depth in
Settings section.!
The exposure icon to the left of the settings button
accesses the camera presets list. The user can save the
camera’s current settings and then change back to those
settings at a later time. Note that particular presets may
no longer be valid in all situations. For example, if a
Canon camera was in Manual auto exposure mode when
the presets were saved, the saved shutter speed will not
be able to be set if the camera has been changed to
Aperture Priority mode.!
To Next Page
Loading...