Network
The network tab displays general network
and Ethernet settings. The user can change
the IP address, enable or disable the DHCP
server, and change the Ethernet port mode
to LAN or WAN. The MAC address is also
displayed.!
For nearly all circumstances, LAN is the
correct Ethernet port mode. WAN can be
used when the CamRanger 2 is connected
to an existing router with an Ethernet cable.
The CamRanger 2 will then be able to be assigned an IP address from the existing router.!
WiFi
The WiFi tab allows the user to configure the wireless networks.!
To Next Page
Loading...